supplies: (ranger) craft sheet, distress ink/fired brick/walnut stain/frayed burlap/vintage photo, distress crackle paint/rock candy, ink blending tool, archival ink/jet black, glossy accents, #8 tag; (idea-ology) grungeboard, corners, trimmings, seasonal paper stash, sanding grip, texture hammer, tiny attacher; (stampers anonymous) calendar stamps; (sizzix alterations) base tray, carved ornaments, joy movers and shapers, gingerbread, winter wonder; (tonic) scissors, paper distresser; (misc) wire, adhesive, pine, paint brush
(step 3): load paint brush with crackle paint.
*once crackle has dried and cracked - check it out! by mixing the rock candy crackle with the inks this creates a much more intense glazing effect.
now we're ready for a little die cutting action - video style...
(step 6): tie a bow around the top of the ornament.
(step 9): place a tag over the area of background paper to add to your tag and trace around tag. *i used my seasonal paper stash.
(step 12): place tag on scrap paper and sand edges with sanding grip to distress the edges.
(step 15): tatter the edges with a paper distresser.
(step 17): ink edges of calendar with vintage photo distress ink using ink blending tool.
(step 18): apply glossy accents to back of ornament.
(step 22): attach calendar to tag with tiny attacher.
*in the details: the look of vintage crackled glass for this ornament using the rock candy distress crackle paint creates a holiday shine like no other. the addition of a scrap of pine and some pine cones accent the december calendar perfectly. i love the simplicity of this tag too...
of course since it's the last tag i thought why stop now??? so check out this other video...
(gingerbread): remove backing from sticky back canvas and attach canvas "frosting" to the gingerbread.
(snowman): brush on multi-medium all over grunge snowman.
supplies: (ranger): craft sheet, ink blending tool, distress ink/broken china/dusty concord/stormy sky/walnut stain/peeled paint/pine needles, distress embossing ink, clear embossing powder, wonder tape, distress embossing powder/peeled paint, adirondack paint dabber/snow cap, glossy accents, heat tool, archival ink/jet black, white opaque pen, #8 tag; (idea-ology) ornate plates, adornments, philosophy tags, jump rings, grungeboard, trimmings, texture hammer, mini fasteners; (stampers anonymous) odds & ends stamp set; (sizzix alterations) snow flurries on the edge die, pine tree die, tag & bookplates die; (tonic) scissors, craft pick; (misc) sparkly fluff, dictionary paper, adhesive, jute
(step 1): we're going to start by making our own foam stamp for this tag so gather a sheet of wondertape and a sheet of fun foam. *you can try different thicknesses and of course colors of foam available at the craft store.
(step 2): remove paper backing from wonder tape sheet.
(step 3): adhere wonder tape to one side of the fun foam sheet.
(step 4): if foam is larger than tape sheet, cut excess with sharp scissors.
(step 5): measure the die shape you would like to cut. for this snow flurries edge it measures 5 3/4"x2 1/2".
(step 6): turn foam sheet over to black side and draw die measurements on foam with white opaque pen.
(step 9): sandwich between 2 clear cutting pads and run through die cut machine. *note: i'm using the standard cutting pads for this instead of the on the edge ones as you need some extra cutting pad for the machine to engage the die. the fun foam will compress once in the machine so even though it may seem too thick, once it flattens, it should be fine.
(step 16): remove the red liner from the wonder tape.
(step 22): apply distress embossing ink to foam stamp.
(step 23): stamp snowflakes along edge of tag with clear embossing ink. *you can decide how much of a border you want on your tag. you may need to stamp your border more than once on the edge of the tag.
(step 24): apply regular clear embossing powder over stamped image.
(step 25): emboss tag with heat tool using image turns clear and shiny.
(step 26): begin inking tag with various colors of distress ink using an ink blending tool - the clear embossed design resists the distress ink!
(step 27): ink the edges and over the stamped image to create contrast with blending tool.
(step 30): immediately apply peeled paint distress embossing powder over inked tree.
(step 31): emboss with heat tool until powders melt and darken slightly.
(step 33): ink the trunk and edges of tree with brown distress ink using ink blending tool.
(step 34): on second grunge tree paint a heavy layer of paint with snow cap dabber.
(step 35): while paint is still wet, apply sugar sparkly fluff.
(step 36): press sparkly fluff down into paint. remove excess by lightly tapping and let dry.
(step 37): using scissors, cut various tips from the white tree to look like snow covered branches.
(step 38): apply glossy accents to back of each snow cap and adhere to green distressed tree lining up the shapes.
did you know? when you die cut the tag there are 2 bookplates and 2 reinforcers on the die.
did you know? that both of these "leftover" shapes fit into my ornate plates from idea-ology. coincidence? nope.
did you know? that my stamp set #100 odds & ends has a variety of ticket stamps that fit the ticket strip die.
(step 44): tap tops of fasteners with texture hammer to dent.
(step 45): apply glossy accents to back "trunk" of tree - do not cover back entirely, just down the center.
(step 47): apply paint dabber to front of philosophy tag.
(step 49): place star adornment above tree and pierce hole with craft pick and secure to tag with mini fastener.
*in the details: i think this foam stamp embossed resist technique is so cool. you can create various looks simply by using different background papers. the glossy enamel finish and bold shape of the stamp is what really gives this such a great effect. of course that distress embossed and sparkly fluffed tree is pretty amazing too...
so there you have it...just one more tag to go tomorrow! i hope you give this technique a try and make some custom foam stamps of your own. you can use them with inks, paints, and of course embossing. remember you can only create these using your steel rule bigz and on the edge dies. the thinner dies are only for paper. so i've got lots to get ready for the last tag with so many ideas flying around my head. until tomorrow...t!m
ok...one more thing:
in the 4 years of 12 tags i have NEVER done this!!!i actually decided to change one of the previously finished tags...seriously???
supplies: (ranger) craft sheet, distress ink/broken china/faded jeans/stormy sky/pumice stone/vintage photo/peeled paint/fired brick, paint dabbers/snow cap/pitch black/sunset orange, glossy accents, distress embossing ink, heat tool, super fine detail black embossing powder, ink blending tool, #8 tag; (idea-ology) grungeboard, mini pin, jump ring, muse token, long fasteners, washers, sanding grip, trimmings, grungepaper; (stampers anonymous) winter sketchbook stamp set; (sizzix alterations) tag & bookplates die, winter wonder die, snowflurries texture fade; (tonic) scissors, craft pick; (misc) tulle, holly punch
(step 3): cut the second snowman into parts shown: arms, hat, nose
(step 6): ink the holly, arms, and edges of the hat and nose with distress inks using ink blending tool.
(step 7): sand the edges of the snowman with sanding grip to expose grunge around the edges.
(step 9): apply super fine detail black embossing powder over stamped text.
(step 10): emboss with heat tool until image is shiny.
(step 11): ink the edges of the snowman with pumice stone distress ink using an ink blending tool. *pumice stone is my favorite color since i like to shade everything with it.
(step 12): "build" snowman by adhering the pieces with glossy accents over snowman base.
(step 13): color trimmings and tie around neck.
(step 14): apply snow cap dabber to the edge of the tag creating a dry brush effect. let dry.
(step 17): next gather up all of your old plastic packaging. yep! the stuff from your grungeboard or other idea-ology stuff, or from those headphones you got at costco, etc. anything with plastic packaging - we're recycling this stuff!
(step 18): with sharp scissors, cut off any raised edges of your packaging so you just have a flat piece.
(step 19): die cut a #8 tag using tag & bookplate die from plastic.
(step 20): place the clear tag into the snowflurries texture fade and emboss it.
*oh yeah - that is so cool looking! the deep embossed designs of the texture fades creates a deep impression in the plastic packaging giving you an amazing designed overlay. some plastics will even frost a little when you do this. try it will all kinds of plastic packaging - oh the possibilities...
(step 21): apply glossy accents to back of grunge snowman and adhere to tag. hold to dry.
(step 22): place embossed clear tag over snowman tag and pierce hole through corner with craft pick.
(step 23): insert a long fastener through a washer. *these things are so great to use for so many things.
(step 24): insert the washer and fastener through both tags securing them together.
so start saving that packaging and put it to good use. this technique can be used with all of your embossing folders and my alterations dies to cut and design just about anything. you can even cut it into pages for a mini book, texture it, and even color it with alcohol inks! i hope you explore the creative possibilities of this one and have fun doing it - i did...which means of course i couldn't stop creating tonight! here's another idea i had for packaging by creating a little trinket collage...enjoy...t!m
- i gathered some supplies: packaging from muse tokens, a cheap ikea frame, some tiny trinkets, a 1" circle punch, some seasonal paper stash sheets (since they have mini images), scissors, black paint, and some glossy accents.
- i cut off the front of the muse tokens packaging from today's tag (there is also an inside sheet). i punched 12 circles from my paper stash and glued them to a sheet of white cardstock and adhered my trinkets with glossy accents.
- i taped the two side edges of the plastic and cardstock together, painted the frame black, and put it into the frame. i filled the top and bottom space with some vintage tinsel to finish it off. another cool idea for packaging i think!
supplies: (ranger): craft sheet, distress ink/wild honey/brushed corduroy/walnut stain, archival ink/jet black, perfect pearls mist/heirloom gold, ink blending tool, glossy accents, matte multi-medium, heat tool, #8 tag; (idea-ology) adornments, accoutrements/fanciful, long fasteners, design ruler, texture hammer, baubles, trimmings, sanding grip, seasonal paper stash; (stampers anonymous) christmas carols; (sizzix alterations) paper rosette decorative strip, upon a time decorative strip; (tonic) scissors, craft pick, paper distresser; (misc) glue gun, tinsel garland, tulle, coredinations paper
(step 3): shake the heirloom gold perfect pearls mists well and mist the inked sheet until large droplets of pearl appear. *i used more perfect pearls mist than i usually use water because i want a very shimmery background.
(step 5): dry tag with heat tool.
(step 6): drag paper distresser along edges of tag.
(step 8): place tag on cork or foam pad and place design ruler along the bottom edge of tag. with craft pick, pierce holes evenly spaced about 1/4" from edge and 3/8" apart - if you're using the design ruler this is a snap since the holes are through the ruler already! check out this video to learn more about the design ruler.
(step 9): insert long fasteners through each hole.
(step 10): place tag on hammer mat and tap the tops with bump tip of texture hammer to dent brads.
*my absolute favorite thing about the texture hammer is using it on brads and staples to give a distressed look. just a few taps and presto - vintage nailheads!
(step 11): sand coredinations paper with sanding grip. *if you don't have coredinations, distress whatever paper you're going to use for the letters. i prefer to do all of my distressing to these small letters before cutting - saves load of time.
(step 12): die cut the upon a time strip 3 times for letters. (if you want to cut the paper to size and cut each letter individually you can, but i don't mind have extra letters for other projects so i always cut the entire alphabet each time i need to)
(step 13): adhere each letter to tag with glossy accents and let dry.
(step 14): apply glossy accents to the top of each letter. let dry.
*if you've never used glossy accents before, this is what makes it perfect - it doesn't drip off of the letters or spread out after you apply it. it dries with amazing glossy shine and dimension in one application.
(step 17): lightly mist the inked rosette with heirloom gold perfect pearls mist.
(step 18): immediately dry with heat tool.
(step 21): adhere rosette to tag with glue gun.
(step 23): adhere heart and crown to center of rosette and let dry. *i prefer matte multi-medium when gluing metal to any surface. it takes a while to dry, but is very permanent once it does and because it's matte you don't have to be neat when you're gluing. i use this stuff for all of my dimensional art projects and jewelry pieces.
(step 27): adhere tulle and accoutrement buttons to tag with glue gun.
(step 29): mist the trimmings with heirloom gold perfect pearls mist to add a pearlescent finish and let dry or dry with heat tool.
*in the details: the elegant simplicity of this tag is so amazing. the shine of the glossy accented letters, the vintage font from the upon a time die, the custom paper rosette with tinsel garland, and what can be better than those accoutrement buttons? the rich warm tones and shimmer of the perfect pearls mists tie everything together on this tag...
supplies: (ranger) craft sheet, distress ink/fired brick/tumbled glass/chipped sapphire/walnut stain, archival ink/jet black, paint dabbers/bottle/snow cap, distress stickles/picket fence, glossy accents, ink blending tool, heat tool, craft scraper, #8 tag; (idea-ology) seasonal mask, tissue tape, timepieces, game spinners, metal corners, locket keys, jump rings, trimmings, texture hammer, sanding grip, grungeboard, tiny attacher; (sizzix alterations) townscape on the edge die; (stampers anonymous) mini holidays stamp set, mini holidays 2 stamp set, fabulous flourish; (tonic) scissors; (misc) dymo, 26g wire, hot glue
(step 1): remove seasonal mask from package. you'll notice in the package there is a printed sheet (for storage), and the clear mask set. *this seasonal mask set has icons for a variety of holidays all year round.
(step 2): with scissors, cut off the bottom santa and sleigh from clear sheet. be careful not to cut the other masks.
(step 3): remove the outside silhouette of the mask - yes the OUTSIDE part. *this is the part we normally throw away, but not anymore!
(step 4): apply the outside silhouette to your tag. rub with your hand to make sure it's secure.
(step 7): continue inking until desired color is achieved.
(step 9): repeat with additional stamp images over entire tag.
(step 12): carefully remove the mask silhouette from the tag slowly to aviod tearing the tag and set aside. *pretty cool huh?...guess you won'e be throwing away the outlines of the masks anymore.
(step 13): heat set distress inks on tag with heat tool for about 30-45 seconds. *even though distress inks are dry to the touch, the resins in the ink are still wet so we need those dry before the next step.
(step 18): ink the edges of the tag with walnut stain distress ink using ink tool.
(step 24): cut out 4 houses from strip leaving a thin border on the bottom with sharp scissors.
(step 26): lightly scuff with sanding grip to give a whitewash shabby look - do not ink.
(step 27): apply picket fence distress stickles to the rooftops to create a snowy effect.
(step 28): dry distress stickles with heat tool or set aside to dry.
(step 29): cut a few pieces of 26g. wire about 5" each.
(step 31): repeat for all wire pieces.
(step 35): place metal corner on corner of tag.
(step 37): place tag on hammer mat and tap the tabs of the metal corner with bump tip of texture hammer to dent the tabs securing it to the tag.
(step 38): repeat for other corner.
(step 39): apply a small amount of glossy accents to the back of the timepiece.
(step 40): adhere to upper corner of the tag. *this will keep the timepiece from spinning around. pierce hole through timepiece and tag with craft pick and secure mini game spinner with long fastener.
(step 41): adhere houses to bottom of tag with glossy accents.
(step 42): create words with label maker. *i love my dymo with interchangeable font wheels (which is vintage) but now you can buy a new one with 3 font wheels including this cool script font - it's called the dymo caption.
*in the details: this extreme masking technique is so amazing. the layers of images and inks create such an illusion of dimension - the possibilities for using masks are endless. you can also create your own masks using your favorite die cuts, punches, or even digital cutters using my blank mask sheets.
just couldn't stop... once again i just had to share a little something extra using the townscape edge die with little wire chimney smoke again - priceless...
(step a): cut townscape from grungeboard and cut off the last house on either end, but only cut off one. cut the bottom edge to 1/2" wide.
(step d): apply a piece of 1/2" wondertape to the bottom edge of grunge.
(step f): wrap townscape all the way around tea-light until ends meet - trim any excess if necessary. *remember it's grungeboard so you can bend away!
supplies: (ranger) craft sheet, color wash/cranberry/red pepper/meadow/lettuce, distress ink/aged mahogany/forest moss/walnut stain/vintage photo/crushed olive/frayed burlap, distress stickles/rock candy, paint dabber/snow cap, archival ink/jet black, glossy accents, heat tool, claudine hellmuth studio sticky back canvas/natural, mini mister, ink blending tool, perfect pearls mist/forever red/forever green, #8 tag; (idea-ology) grungeboard, grungepaper, type charms, trinket pins, adornments, accoutrements/fanciful, grunge alphabet soup, trimmings, lost & found paper stash, sanding grip; (sizzix alterations) woodgrain texture fade, tattered florals die, tattered leaves die, elegant flourishes die, vagabond machine; (tonic) scissors, scratcher; (stamp) love; (misc) glue gun
(step 1): cut an 8 1/2"x11" piece of natural sticky back canvas in half to 8 1/2"x5 1/2".
(step 3): remove backing from sticky back canvas exposing the sticky side.
(step 4): press the canvas on to non-stick craft sheet. *this is a perfect use for the craft sheet.
(step 5): mist canvas with water from mini mister until canvas is damp.
(step 6): next, mist the canvas with cranberry color wash. *this is a concentrated textile dye. yes you can use distress reinkers or other dyes to color this canvas, but with color wash, a few sprays and you're done since a little goes a long way.
(step 7): mist the canvas with red pepper color wash.
(step 8): shake perfect pearls mists and mist canvas with forever red. *this will make the color wash spread throughout the canvas and give it a pearlized finish when it dries.
(step 11): repeat the above steps on the remaining 2 1/2"x5 1/2" strip of sticky back canvas using lettuce and meadow color wash, and finished with forever green perfect pearls mist. dry with heat tool.
(step 12): remove the dry canvas pieces from the craft sheet and adhere to a piece of grungepaper.
(step 13): cut excess grungepaper off creating 2 pieces.
(step 14): die cut the red canvas/grunge with the tattered florals die. cut the green canvas/grunge strip in half and cut 2 rose leaves with the tattered leaves die (you can stack both canvas/grunge pieces and cut 2 at once).
(step 16): with a sharp pair of scissors, make a snip between each petal on the largest flower to the center dot.
(step 19): ink the edges of both leaves with forest moss distress ink using ink tool.
(step 20): place each petal on to a piece of scrap paper and tatter the canvas edge tips with a scratch tool.
(step 21): repeat for all petals and leaves. *the scratch tool makes these canvas petals even more textured - so cool.
(step 24): continue inking adding additional accent colors like crushed olive. yum!
(step 26): finish inking edges with a darker shade of brown like vintage photo to create shadows - this is really starting to look like a piece of wood.
(step 27): apply a generous scribble of rock candy distress stickles to the tag.
(step 29): dry the distress stickles with a heat tool until the rock candy begins to have the nostalgic look of glass glitter or sprinkled sugar. *i suggest drying immediately to avoid your tag curling too much. also remember you cannot heat regular stickles like this or they will burn and smoke!
(step 30): apply a very small amount of rock candy distress stickles to one edge of the petal only.
(step 35): create texture in both leaves as well. *it's pretty neat how grungepaper does that huh?
(step 36): remove grunge letter from alphabet soup - my favorite grunge letter set. *of course you can use whatever alphabets you have for this tag.
(step 39): adhere the letters to the bottom of the tag with glossy accents.
(step 44): snip the ends of the leaves with scissors.
*gather your favorite accoutrement buttons and choose just one - definitely hard to do!
(step 46): adhere the button to the center with hot glue and check that out - a poinsettia using the tattered florals die. now who would have thought? ummm...me! :)
(step 48): paint the flourish snow cap white. let dry.
(step 49): scuff the edges of the flourish with sanding grip.
(step 50): ink the flourish with walnut stain distress ink using ink tool.
(step 55): adhere that to the center of a type charm with glossy accents.
(step 56): press on the epoxy sticker that comes with the type charms to finish.
*in the details: this tag is pure dimensional goodness! starting with the woodgrain background of the tag, the shaped canvas and grungepaper flowers, and the sparkle of the rock candy distress stickles makes it look like ice - love it i tell you...
supplies: (ranger) craft sheet, distress ink/weathered wood/tumbled glass/forest moss/vintage photo/walnut stain/fired brick/frayed burlap, paint dabbers/gold/aqua, super fine detail clear powder, heat tool, mini mister, glossy accents, #8 tags; (idea-ology) word sticks, adornments, tissue tape/symphony, mini fasteners, grungeboard, trimmings, journaling tickets, jump rings, sanding grip; (sizzix alterations) texture fades/tall pines/snow flurries, reindeer flight/branch tree bigz dies, vagabond; (stampers anonymous) fabulous flourish stamps, mini holidays 2 stamps, speckle stamp; (tonic) scissors, paper distresser, craft knife; pine, ribbon, foam tape
let's get going: lights, camera, action...
(step 2): sand over raised embossed design with sanding grip to expose grunge. scuff around edges with sanding grip as well. *the sanding grip will allow you to sand just the raised areas becasue of it's design. sanding with just a piece of sandpaper and your fingers will sand off the color areound the design as well and we don't that for this technique.
(step 3): ink over reindeer with frayed burlap distress ink using ink blending tool to stain exposed grunge.
(step 4): mist cloth with water from mini mister.
(step 8): oh yes...i designed the branch tree to work as antlers for the reindeer flight die - i honestly did. makes the perfect antlers wouldn't you agree?
*and if you snip the branches from the other side of the tree, they fit the second deer on the die. if you don't have this die yet, i'm just sayin' wait until you see what i'm going to show you with it next month...and you thought the rickety house was cool?
now it's time for another video step - i love this next one!
(step 10): add some shadows with a deeper tone of distress ink. i used weathered wood. *it's okay that the trees are now blue...
(step 12): ink the trunks of the trees with vintage photo distress ink using an ink blending tool.
(step 14): ink the edges with walnut stain distress ink using an ink blending tool.
(step 17): remove the red/green striped journaling ticket. *i'm using a journaling ticket because i like the colored lines for this holiday tag. you can use whatever paper you want for this next step.
(step 19): apply super fine detail clear embossing powder over stamped text. *remember from tag #2 that distress ink is an embossing ink so no need for red embossing ink!
(step 20): heat emboss with a heat tool until powder melts and you have a glossy red text.
(step 23): fold the end of the tissue tape back on to itself sticky side to sticky side about 1/2".
(step 24): press the tissue tape on to the bottom edge of the tag leaving the folded/non-sticky part hanging off the edge of the tag.
(step 25): begin pleating and gathering the tissue tape across the bottom of the tag - it does this with ease.
(step 27): snip the ends of the tape with your scissors with create a "v" tail.
*now you have a vintage tissue tape music banner on the tag - another great use for tissue tape!
(step 31): slip it over the head of the reindeer and slide down around the neck.
(step 34): apply glossy accents to the back of the deer - be sure to get the legs.
(step 36): apply glossy accents to back of grunge antlers.
(step 38): attach seasons greetings to tag with foam tape. *i attached mini fasteners to the corners of the text, but this was very tedious so attempt if you dare! tie trimmings to top of tag and attach word stick and adornment star with jump rings. we're done...
*in the details: where do i begin on this one? there are so many cool details about this tag, like that tricky stamped texture fade background... then the embossed grunge reindeer with those antlers... then that mini pine wreath that really sets it off... adding the tissue tape banner, the embossed ticket sign, and the metal trinkets to the top just makes it...
now i just had to share this one i did for a card: this one uses the holly stamped with forest moss distress ink and merry christmas texture fade on white cardstock. then i inked with antique linen distress ink, and accented with fired brick distress stickles.
supplies: (ranger) craft sheet, distress inks/aged mahogany/fired brick/barn door/vintage photo, archival ink/jet black, distress crackle paint/peeled paint, paint dabber/snow cap white/pitch black, distress stickles/peeled paint/fired brick, glossy accent, ink blending tool, heat tool, white UTEE/ultra thick embossing enamel, white opaque pen, distress embossing powder/fired brick/peeled paint/mustard seed, distress embossing ink, mini mister, #8 tag; (idea-ology) grungepaper, numerals, foliage, trimmings, seasonal paper stash, jump rings, sanding grip; (tonic) scissors, craft pick; (sizzix alterations) styled labels; (stampers anonymous) winter sketchbook stamp set, holiday wishes stamp set; (misc) sparkly fluff/sugar, bells, zig glue pen
(step 4): mist towel with water from mini mister.
(step 9): dry with a heat tool. *one of the great things about distress stickles is that you can dry with a heat tool.
(step 10): apply snow cap paint dabber to the craft sheet.
(step 13): dry with a heat tool.
(step 15): highlight stamped image with a white opaque pen.
(step 17): apply a thin layer of distress crackle paint to grunge.
(step 18): dry with a heat tool - this will only crackle a little since we've applied a thin layer.
(step 21): tear a strip of music paper from paper stash.
(step 22): ink edges of the paper with vintage photo distress ink using ink blending tool.
(step 23): adhere paper to the grunge with glossy accents.
(step 24): apply glossy accents to the back of the grunge.
(step 27): ink the edges with distress ink with ink blending tool.
(step 28): open the pack of numerals and take out the 2 and 5.
(step 30): IMMEDIATELY apply white UTEE over the wet paint. *it's important the paint is still wet for the powder to stick.
(step 33): as powder begins to melt on the numeral it will become bubbly, move heat tool closer.
(step 35): once the numeral is completely cool, gently scrape excess powder from the edge with your finger.
(step 36): apply a small amount of black paint dabber around the edges and immediately rub the paint off of the numeral.
(step 38): place numerals on center of grunge and pierce through holes with craft pick and secure with long fasteners.
(step 40): shake distress powder and apply powder over metal. remove excess powder and replace into jar.
(step 42): allow to cool and rub excess powder off metal foliage with your fingers.
(step 47): while glue is wet, apply sparkly fluff and press to adhere.
(step 48): replace excess fluff and place back into the jar - now santa's hat is perfect!
*in the details: the texture on this tag provide such a nostalgic look with the crackle paint, sparkly fluff, UTEE and distress powders. i like the vintage enamel numerals, and vintage colored metal foliage simply by using embossing powders.
supplies: (ranger) craft sheet, adirondack alcohol inks/denim/sailboat blue/pool, archival ink/jet black, glossy accents, stickles/silver, ink applicator tool, distress ink/faded jeans, ink blending tool; (idea-ology) facets, swivel clasp, jump rings, baubles, trimmings, mini pins, mini clips, adage tickets, seasonal paper stash; (stampers anonymous) mini holidays stamp set, mini holidays 2 stamp set; (tonic) scissors; (misc) bling on a roll, pearls on a roll
(step 1): we're working with facets and the cool thing about these is they are flat on one side and faceted on the other so we have lots of options to be creative with - they also come with small jump rings so they're ready to be attached.
(step 3): apply random colors of adirondack alcohol ink to felt by squeezing the ink into the felt.
(step 4): working on the FLAT side of the facet, tap inked tool over facet to colorize.
*here i wanted to show you the variation in color intensity you can achieve by stopping at one layer of ink vs. adding additional layers. *for more info on using alcohol inks click here.
(step 7): press facet flat side down on to the stamp creating an INK to INK contact (alcohol ink to archival ink) and lift off.
(step 8): what we're going to do instead is immediately blot the archival ink off (while it's wet) with a soft dry cloth. blotting is going to lift the wet archival directly off of the facet. DO NOT wipe for this step, just blot off as much ink as you can. *it's important to work quickly becasue if the archival ink dries it will be permanent.
*that's right - the jet black archival ink removed the alcohol ink leaving the image completely clear! now if this step didn't work out quite right, don't worry you can simply go back and reink the facet covering everything up and try it again...another thing to keep in mind is that the image is now reverse so you shouldn't really do this technique with words...
(step 11): place the facet on to white cardstock and hold in place to dry.
(step 12): cut around the outside of the facet with a sharp pair of non-stick scissors.
*there you have it - an alcohol ink resist facet....cool technique isn't it?
(step 14): i wanted a festive background so i placed a tag over a piece of seasonal paper and traced around it.
(step 23): select an adage ticket.
*in the details: i love the way the inked facet pops off of this tag. this could also make a cool ornament, wearable piece of jewelry or accent on a holiday journal.
so now...more ideas (sorry i simply couldn't help myself again). sometimes i like to use a stamped image behind a facet instead of stamping on them, but i wanted to create a subtle tint around the image and still add a little sparkle - here's how i did it...
(sparkly snowman) stamp the mini snowman on to a piece of white cardstock with archival ink and let dry.
(sparkly snowman) apply silver stickles around the clear center on the back of the facet. *distress stickles don't work real well for this effect.
(sparkly snowman) apply glossy accents across the entire back of the facet.
(sparkly snowman) cut around excess paper with non-stick scissors and marvel at your sparkly creation!
okay so i also wanted to show you a very simple way to create a custom facet just from using your favorite papers.
(custom facet) select the paper you would like to use - i'm using my seasonal paper stash. *i love this paper stash becasue it has all of the seasons in one stash: vintage valentines, easter, spring, 4th of july, halloween, thanksgiving, and christmas!
(custom facet) apply glossy accents to the flat side of the facet and spread around the whole surface the tip of the bottle.
(custom facet) trim excess paper with non-stick scissors.
supplies: (ranger) craft sheet, distress ink/bundled sage/forest moss/peeled paint/walnut stain/vintage photo, adirondack paint dabber/snow cap, adirondack alcohol ink/red pepper/watermelon, ink blending/applicator tool, distress stickles/rock candy, glossy accents, mini mister, archival ink/jet black, #8 tag; (idea-ology) grungeboard, tissue tape/symphony, accoutrements/fanciful, salvage stickers/seasonal, trimmings, memo pin, tiny attacher, sanding grip; (tonic) scissors, distresser; (stampers anonymous) winter sketchbook stamp set, letters to santa stamp set, speckle wood mount stamp; (sizzix alterations) caged bird bigz die; (misc)tinsel, circle punch, moss
so on with today's tag which starts with a video! let's go....
(step 1): apply rock candy distress stickles to inked grunge.
(step 3): gather up your tag and tree stamp....wait a minute...tree stamp?
(step 4): turn the stamp and stamp the tree sideways on the tag with archival ink - gotcha! let dry or dry with heat tool.
(step 6): begin adding darker shades of green distress ink using blending tool.
(step 8): make a cup with your hand and mist water into it from mini mister.
(step 10): dry water with heat tool and watch as lighter dots appear. *you can repeat the previous steps for more dots if desired.
(step 11): drag paper distresser along the edges of the tag to tatter.
(step 13): stamp script stamp over entire background of tag with bundled sage distress ink.
(step 14): remove mini postcard salvage sticker.
(step 17): sand the edges of the sticker with a sanding grip.
(step 19): okay now i must confess...i said yesterday that the "life is the art" stamp was one of my favorites, and it's one of them, but THIS stamp is by far my most favorite stamp. i know some people would think it's the large flourish that i'm always sporting around when i demo (i do love that one too), but honestly this stamp gets used all the time. i'm sure you'll know when you see it but it's the speckled stamp. apply snow cap dabber to the stamp.
(step 20): stamp the edge of the tag with painted stamp to create a snow flurry look. *this stamp makes snow, stars, speckles, sand, confetti...so many uses!
(step 23): adhere grunge wing to bird with glossy accents.
(step 25): adhere grunge bird to tag with glossy accents.
(step 26): cut trimmings and color with distress ink. (*check out the previous 2 tags for instructions on this step)
(step 27): cut elastic trimmings to width of tag.
(step 30): attach the tinsel over the trimmings with the tiny attacher securing it through the tinsel, elastic trimmings, and tag. *yes the tiny attacher is that good! it is designed to go through several layers - love it!
now how about another video??? oh yes!
(step 33): adhere tissue tape flower to tag with adhesive of choice (i use my glue gun) and secure memo pin under flower.
(step 34): tie trimmings and tulle through tag and you're done!
*in the details: i really like the ruffled texture and vintage look these tissue tape flowers and accoutrments create. they are so simple to make, and you can design any size for any project!
supplies: (ranger) craft sheet, cut n' dry felt, distress reinkers/forest moss/peeled paint/vintage photo/walnut stain, distress ink/stormy sky/weathered wood/walnut stain/fired brick/aged mahogany/pumice stone/frayed burlap, archival ink/jet black, heat tool, ink blending tool, enamel accents, mini mister, matte multi-medium, clear embossing powder, #8 manila tag; (idea-ology) adornments, baubles, jump rings, trimmings; (tonic) scissors; (stamps) winter sketchbook stamp set, holiday wishes stamp set, fabulous flourishes stamp set, urban tapestry stamp set
(step 2): ink image with jet black archival ink. *if you don't have archival, any permanent/waterproof ink will work, but it has to be permanent.
(step 3): stamp image on to the fabric side of the cut n' dry squaring up the block of your stamp with the edges of the cut n' dry. be sure to press firmly as you're stamping on a squishy surface. DO NOT LIFT YOUR STAMP OFF YET!
(step 6): clean you stamp off in whatever stamp cleaning "ritual" you practice. it's just a dry towel for me, maybe a mist of water every now and then but not a drop of stamp cleaner...sorry, don't get me started. i simply don't want to waste time scrubbing a stamp only to use it again, and besides i don't like the residue stamp cleaners leave on my stamps. okay, enough said...moving on...
(step 7): cut on the marked likes using a sharp pair of scissors - this stuff is pretty thick.
(step 8): gather up the colors of distress reinkers of your choice. *normally you can use any type of dye reinker, but for this technique - distress reinkers are needed.
(step 9): begin coloring directly over your stamped image with various colors of reinkers. i prefer to work from light to dark colors by gently squeezing the dropper of the reinker to apply ink to the image. it's important to color ON the lines for this!
(step 11): continue inking the entire image until colored. you'll notice the inks will start to wick out in the fabric of the cut n' dry - don't worry. the coolest thing of this product is when colors meet up against each other they won't cross contaminate. cut n' dry felt is the most amazing product!
(step 16): now this is the coolest part...you can apply clear embossing powder over the image after you've stamped it. yes - distress ink is an embossable dye, always has been. that's why we needed to use distress reinkers for this one.
(step 17): remove the excess embossing powder from the image.
(step 18): heat emboss the image with heat tool. *tip: if you hold the paper off of the table when you're heating it, this will allow the heat to pass through the paper and emboss your image in half the time. try it!
(step 20): ink the tag with distress ink using an ink blending tool. here i used stormy sky and weathered wood for a wintery sky look. since your image is embossed it will resist any color you apply over it. see it just gets better and better! finish off the edges with walnut stain.
(step 23): apply aged mahogany distress ink to various areas of the image to add some shadow. *by working light to dark you don't have to worry about contaminating your distress pads.
(step 26): stamp the splatter stamp with walnut stain to create a speckled edge.
(step 27): apply matte multi-medium to back of the bird adornment charm. *i love matte multi-medium as an adhesive for my embellishments since it holds everything, and i mean everything, and it doesn't leave any shine if you're a sloppy gluer like i tend to be...
(step 29): stain custom trimmings by misting with water and then swipe distress pad over to tint. let dry.
(step 30): attach trimmings to tag.
(step 32): prime enamel accents on craft sheet to establish flow.
remember the ticket i used on yesterday's tag? well it was created following the same technique:
then i inked my christmas ticket stamp on my custom cut n' dry felt stamp pad i created for that particular stamp, and to line it up with the ticket strip, i placed the stamp image side up on my table and pressed the ticket on to the stamp.
like i said, i really do think this technique is so cool...so cool that i couldn't stop creating after the tag was done. i just had to share more inspiration and ideas with you. i know, i know, but when the voices in my head start shouting the "how'bout's" i tend to listen (you know...how about this? how about that?). check out these other ways to use a cut n' dry felt custom stamp pad that will have you stamping everything in sight...
(water misting): ink stamp on custom stamp pad and mist stamp with water from mini mister.
(water misting): dry image with heat tool and as you dry the inks will wick into the paper.
(watercolor): distress is reactive with water so it blends beautifully. add a few flicks of the wet brush for droplets of ink in the background and dry with heat tool.
now if you're thinking that this cool technique is just for the holidays - guess again. check out this custom pad i did for one of my favorite stamp images...
supplies: (ranger) craft sheet, heat tool, ink blending tool, mini mister, distress inks/stormy sky/tumbled glass/faded jeans/vintage photo/walnut stain, distress crackle paint/picket fence, glossy accents, wonder tape, paint dabbers/snow cap, perfect pearl mists/pearl, #8 manila tag; (idea-ology) mini pins, mini clips, adornments, jump ring, grungeboard, grungepaper, trimmings, sanding grip; (sizzix alterations) rickety house bigz, pine tree bigz, on the fence on the edge, notebook texture fade; (tonic) scissors; (stampers anonymous) winter sketchbook stamp set, odds & ends stamp set; (misc.) sparkly fluff, holly garland, mica, q-tip, hot glue
about the tags: before we get started i wanted to address the most asked question i get..."why tags?". i guess the first reason is i like them. i like the shape of them, the versatility of them, and the ability to create something finished in a short period of time. they're fun to decorate with, fun to trade, and fun to use on gifts or even send in the mail. i prefer to work on #8 13pt. manila tags. for the most part, the manila coating on the tags have nothing to do with any technique i do, but they do tend to hold up better when wet than regular cardstock does. i know for many people getting this large size tag is difficult, but now you have options!
ranger has these #8 tags in packs of 20 as part of their inkssentials surfaces:
or, you can always die cut your own with my alterations tag die which also cut the reinforcers and 2 decorative bookplates (but more on that later). i simply cut up file folders, and now i have the same manila tags to use! you get about 6 tags per folder.
(step 6): place grungeboard on a scrap piece of paper or chipboard and sand the raised texture with a sanding grip . continue sanding until the raw grunge is exposed (the white paint should remain in the recessed areas).
(step 9): repeat inking one side of all grungeboard strips.
(step 10): mist towel with water from mini mister.
(step 14): remove other backing of wonder tape exposing adhesive and begin adhering grunge strips to sheet. *if you don't have wondertape you can simply glue the strips to the grungepaper with your favorite adhesive.
(step 18): okay here is where you need to take a deep breath. there's no doubt that when you try to remove these thick layers from this detailed die, that some little pieces will get stuck and tear away from the grungepaper. don't worry!
(step 19): using a craft pick, remove stuck pieces from the die and stick back on to grungepaper.
*die maintenance: whenever you cut thicker materials with detailed dies, it's important to always remove the "stuck" pieces left in the die with a craft pick before using the die again. over time, your die may look like a pin cushion, but not to worry, it will still cut just fine!
(step 21): flip house over and tear scraps of mica to the back for the windows. i like to tear the scraps to create more reflection. *if you don't have mica, get creative and recycle some of that clear packaging - it works great too.
(step 22): adhere mica to back of house with glossy accents.
(step 23): using a paint brush, paint a thick layer of picket fence distress crackle paint on top edges of the house for dimensional snow. use the brush to drag some of the paint down to create icicles. let dry and crackle completely.
(step 25): paint one side of the grunge with a medium layer of picket fence distress. let dry and crackle.
(step 28): shake the perfect pearls mist VERY WELL and mist ink to create droplets of color. *you can also use a mini mister filled with water and perfect pearls for this step if you wish.
(step 30): flip tag over and dry with heat tool. repeat previous steps creating as many layers of color as you want until the desired look is achieved.
(step 31): stamp snowflakes on tag with darkest shade of blue distress ink (i used faded jeans).
(step 36): once crackle paint is dry on the house you'll notice the crackle absorbed some of the brown distress ink, that's okay we used crackle just for added texture. apply glossy accents over crackle painted areas.
(step 37): cover areas with sparkly fluff (i used sugar color).
(step 38): remove excess sparkly fluff and set aside to dry.
(step 39): you'll notice the crackle paint has stuck in between the fence areas of the grunge - leave it there, it looks like snow drifts don't you think? (i applied a little glossy accents and sparkly fluff to the bottom edge of this too).
(step 40): die cut a piece of grungeboard using pine tree die and apply a heavy layer of paint with snow cap dabber.
(step 41): while paint is still wet, apply sugar sparkly fluff.
(step 42): using scissors, cut various tips from the white tree to look thin out the snow covered branches.
(step 43): apply glossy accents to the back of the grunge house.
(step 50): embellish tag by adhering the tree, wreath, and cotton "smoke" with hot glue. attach trimming ribbon to top of tag and sure a star adornment to ribbon with a mini pin. finally add a stamped ticket to the side of the tag with a mini clip. (i'll share the trick to how that ticket was made on tomorrow's tag!).
whew! not bad for our first tag right? like i said, sometimes there are just more steps on certain tags than others. it just depends on the details - and i love details! one more thing i wanted to share about details are some other cool things that go with the rickety house die - trees...